Wilkinson VS50 Push in Tremelo Arms

Available in Brushed Chrome or Brushed Gold.

Simply a case of dropping the arm into the hole on the VS50, then tightening the alan bolt at the back to keep it in place.

Wilkinson VS50mkII / VS100 Inner Thread Tremelo Arm

Available in Brushed Chrome

Simply a case of dropping the arm into the hole and then screwing it onto the small protuding screw in the block. Nice and simple.

Fender Tremelo Arm Springs

Available in Black - P/N 099-4931-000

A strange little part that you probably didn't know was there until it was missing. Basically, they sit loose underneath the trem arm in the block, and keep the tension up when the arm is screwed in. An absolute nightmare when they go missing too.

Wilkinson Push in Trem Arms

Available in Gold, Chrome and Black.

5mm at the trem end.

Simply a case of dropping the arm into the hole on the Trem, then tightening the alan bolt at the back to keep it in place.

Flloyd Rose Trem arm with Screw in Collar, No bush

Available in Gold, Chrome and Black.

Just a case of inserting the new arm into the existing bush in the trem, then screwing the threaded collar onto the protrution.

Flloyd Rose Trem arm with Screw in Collar, Supplied with replacement bush

Available in Gold, Chrome and Black.

Pretty easy to replace the bush on an FR. Just unscrew the Alan bolt at the bottom, then the casing should come away. Then just whip the bush out of the top of the trem and install the new one. Then just pop in and screw down the trem arm and your ready to whammy again.

Flloyd Rose Push in Trem Arm

Available in Black or Chrome

Simple enough job. Just Push in the Arm and tighten the alan bolt to hold it in place.

Left Handed Chrome, Thin thread Whammy Arm.

Available in Chrome

5mm External thread. Should be a perfect replacement for most vintage fender trems, as well as many imports. Simply Screws into the theaded hole in the block.

Right Handed Chrome, Thin thread Whammy Arm.Usually for thick full block Tremolo's

Available in Chrome, Gold and Black

5mm External thread. Should be a perfect replacement for most vintage fender trems, as well as many imports. Simply Screws into the theaded hole in the block.

Right Handed Chrome, Thick thread Whammy Arm.Usually for Thin Block Tremolo's

Available in Chrome, Gold and Black

5.7mm External thread. Should be a good replacement for any thin block trems, as well as many imports. Simply Screws into the theaded hole in the block.

Right Handed Chrome, Thick thread Whammy Arm - No Tip

Available in Chrome, Gold and Black

5.7mm External thread. Should be a good replacement for any thin block trems, as well as many imports. Simply Screws into the theaded hole in the block.

Right Handed Chrome,Pop in Whammy Arm.

Available in Chrome, Gold and Black

About 5mm at the trem end, simply force the ball end into the cavityand through a washer where it will hold. No need for alan keys or threads.