Guitar Parts Catalogue

 

 

Welcome to Axesrus

 

Home to all your Guitar parts And Spares needs.

 

Please feel free to browse the website and get in touch if you have any questions.

 

Online Orders Only.

Contact

High Spec Wiring Loom

A high quality pre-wired loom, sporting full sized alpha pots, a full sized 3 way Toggle switch and classic metal braided wire.

A straight forward job to install, simply connect the pickups to the input terminals on the volume pots and connect the ground to earth.

Supplied with Knobs and Tip of your choice.

Click to see Technical Spec

The switching system works as follows.

3 - Neck pickup with tone control.
2 – Bridge and Neck pickup with tone control.
1 - Bridge pickup with tone control.

 

Kit supplied with

4 x Alpha, medium shaft pots (A500k Tone, B500k Volume, Split Shaft)

1 x Mono Socket,

Braided Metal Hookup Wire

1 x Myler Cap ( 0.022 @100v)

1 x 3 way Toggle Switch (w/ tip of your choice)

4 x 5.9mm shaft shaft knobs

(Available in Speed, Bell, Top hat or Witch Hat)

1 x Strip of Termination Block (for small bore wire runs)

All Components have a tolerance of 10% or better

 

Price: £39.00

.

Import Wiring Loom

A pre-wired loom for most import Les Pauls, SGs and Hollow bodies. Easy to install and use - a great part for anyone whos not quite up to speed with their soldering iron.

 

Click to see Technical Spec

 

Pots - 500k Mini Alpha (2 x A, 2 x B)

Caps - 0.022 Mylar

Switch - Long thread Alpha Import

Socket - Alpha Mono

Wire - Highly insulated

All nuts and washers included

 

Price: £15.00

.
BB King Lucile Wiring Kit

Epiphone "Lucile" Wiring Loom

A great little invention from Epiphone, based around the similar system found in BB kings very own Lucile, its a straight forward Epi wiring setup, but with the built in Varitone system giving 5 frequency cut settings.

On top of that, the loom sports a stereo and mono jack. Plug into the mono for standard playing, but plug in a second cable into the stereo socket (attatched to a second amp) and the pickups split! With the Bridge coming out of the stereo socket, and the Neck coming out of the Mono. Unplug the stereo and they both come out of the mono socket again.

Click to see Technical Spec

Wiring - Simply connect the pickups to the marked terminals on the Variton Switch Board and ground as usual.


Pots - Alpha 500k (2 x A, 2 x B)

Switch - Long Thread Epiphone

Caps - 0.022 Mylar

Mono Socket - Alpha

Stereo Socket - Switchcraft

Variton Settings

1 - Bypass
2 - 5db and 1950hz
3 - 12db at 1100hz (single coil range)
4 - 16db at 620 hz (single coil range)
5 - 18.5db at 360hz (Bassy)
6 - 6.21db at 120hz (Bassier)

 

Price: £39.00

.

Gibson Les Paul Wiring Kit - High End

A complete wiring solution for most Gibson* Les Pauls, featuring long shaft CTS pots, a Switchcraft 3 way toggle switch and orange drop caps. This really is a top end wiring kit.

Now available with braided metal hookup wire and a switchcraft mono socket.

Please Note - Now available with " Extender Switch Nut" for guitars with a top panel thicker then 4mm.

Click to see Technical Spec

Kit includes

4 x CTS Audio taper or Linear 250 0r 500k Long Thread, Split Shaft Pots

1 x Switchcraft Mono Socket

1 x 30" of Metal Braided Hookup Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 way Short Thread Switch Craft Switch (pre-tinned lugs) (w/Tip of your Choice)

Supplied with all nuts & washers included

All Components have a tolerance of 10% or better

* Please note - this kit is not suitable for Epiphones or Gibson Studios

 

Price: £42.00

.

Gibson Les Paul Wiring Kit

A complete wiring solution for most Gibson* Les Pauls, featuring long shaft CTS pots, a Switchcraft 3 way toggle switch and orange drop caps. This really is a top end wiring kit.

Please Note - Now available with " Extender Switch Nut" for guitars with a top panel thicker then 4mm.

Click to see Technical Spec

Kit includes

4 x CTS Audio taper or Linear 500k Long Thread, Split Shaft Pots

1 x Mono Socket

2 x 30" of Waxed Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 way Short Thread Switch Craft Switch (pre-tinned lugs) (w/Tip of your Choice)

Supplied with all nuts & washers included

All Components have a tolerance of 10% or better

* Please note - this kit is not suitable for Epiphones or Gibson Studios

 

 

Price: £39.00

.

Gibson Hollow Body Wiring Kit

A complete wiring solution for most Gibson* ES Style Hollow or SG bodies, featuring medium shaft CTS pots, an angled Switchcraft 3 way toggle switch and orange drop caps. This really is a top end wiring kit.

Please Note - Now available with " Extender Switch Nut" for guitars with a top panel thicker then 4mm.

Click to see Technical Spec

Kit includes

4 x CTS Audio Taper or Linear 500k Medium thread, split shaft pots

1 x Mono Socket

2 x 30" of Waxed Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 way Short Thread Switch Craft Switch (w/ pre-tinned lugs) (w/Tip of your Choice)

Supplied with all nuts & washers included

All Components have a tolerance of 10% or better

* Please note - this kit is not suitable for Epiphones

 

Price: £39.00

.
Shallow Body Gibson Wiring

Epiphone/Import Upgrade Wiring Kit

The natural upgrade for most Epiphones* and Import, bringing them in line with Gibson Studios- with CTS pots offering better reliability.

 

Click to see Technical Spec

Kit includes

4 x CTS Audio Taper or Linear Split Shaft Pots (250k or 500k)

1 x Mono Socket,

2 x 30" of Waxed Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 Way Short Toggle Switch (Chrome, Gold or Black w/Tip of your Choice)

Supplied with all nuts & washers included

All Components have a tolerance of 10% or better

* Please note - this kit is suitable for Gibson Studios, or Epiphones with 9.5mm pot holes.

 

Price: £31.00

.

Gibson Wiring Kit - Ultimate Mod

The ultimate Gibson* modification - allowing a for any combination of coil tapping and phase switching to really expand the possibilities available from a les paul.

In the below wiring diagram, the functionality is as follows, the neck volume coil taps the neck pickup, the bridge volume coil taps the bridge pickup, the neck tone puts the neck and bridge pickups into series, and the bridge tone puts the pickups out of phase.

But - there are plenty of different ways to use this kit to get a very unique sound for dual humbucker guitar.

Click to see Technical Spec

Kit includes

4 x Alpha A or B long shaft push pull pots(500k)

1 x Mono Socket,

2 x 30" of Waxed Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 way Short Thread Switch Craft Switch (pre-tinned lugs) (w/Tip of your Choice)

All Components have a tolerance of 10% or better

* Please note - this kit is not suitable for Epiphones or Gibson Studios

 

Price: £46.00

.

Epiphone Wiring Kit - Ultimate Mod

The ultimate Epiphone* modification - allowing a for any combination of coil tapping and phase switching to really expand the possibilities available from a les paul or SG style guitar.

In the below wiring diagram, the functionality is as follows, the neck volume coil taps the neck pickup, the bridge volume coil taps the bridge pickup, the neck tone puts the neck and bridge pickups into series, and the bridge tone puts the pickups out of phase.

But - there are plenty of different ways to use this kit to get a very unique sound for dual humbucker guitar.

Click to see Technical Spec

Kit includes

4 x Alpha A/A/B/B or A/A/A/A or B/B/B/B push pull pots(500k or 250K)

1 x Mono Socket,

2 x 30" of Waxed Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 Way Short Toggle Switch (In Gold, Chrome or Black w/Tip of your Choice)

All Components have a tolerance of 10% or better

* Please note - this kit is suitable for Epiphones, Imports or Gibsons with short pots.

 

Price: £29.00

.

Epiphone/Import Wiring Kit - Coil Tap

The standard Epiphone* wiring kit, but with the added option of a push pull pot to coil tap both humbuckers.

 

Click to see Technical Spec

Kit includes

1 x Alpha Push Pull Pot (250 or 500K, Linear(B) or Log(A))

3 x Alpha A/B/B or A/A/B or A/A/A or B/B/B pots (250 or 500K)

1 x Mono Socket,

2 x 30" of Waxed Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 Way Short Toggle Switch (Chrome, Gold or Black w/Tip of your Choice)

Supplied with all nuts & washers included

All Components have a tolerance of 10% or better

* Please note - this kit is suitable for Epiphones, Imports or Gibsons with short pots.

 

Price: £24.00

.

Epiphone/Import Wiring Kit

The standard Epiphone* wiring kit, no bells or whistles, just good quality, affordable parts to get your guitar up and running again.

 

Click to see Technical Spec

Kit includes

4 x Alpha A/A/B/B or A/A/A/A or B/B/B/B pots(500k or 250K)

1 x Mono Socket,

2 x 30" of Waxed Wire

1 x 24" 4 core, highly insulated wire

2 x Orange Drop Cap (0.022 @100v, 0.033 @100v, 0.047 @100v, 0.001 @100v, 0.015 @100v or 0.1@100v)

1 x 3 Way Short Toggle Switch (In Gold, Chrome or Black w/Tip of your Choice)

Supplied with all nuts & washers included

All Components have a tolerance of 10% or better

* Please note - this kit is suitable for Epiphones, Imports or Gibsons with short pots.

 

Price: £22.00

.

 

 

© Copyright Axesrus 78 Mollison Road, Hull, Hu4 7hh, UK 01482 647630 (Tel - 10am-2pm)

 

Contact Axesrus - Statement Disclaimer - Copyright Information - Terms & Conditions