Latching Stomp Switch.

On/Off Configuration.

Artec SE2FS 2 Channel Foot Switch.

A number of amplifiers need two foot switchs - DRIVE SELECT and REVERB. The SE-2FS is a very useful appliance for this.  You can use this for single channel or double channels. Also you can use this for double channels with a stereo cable.

Artec VPL-1

Active Boost and Volume Control Pedal with - Volume Pedal Output, Fixed Gain Output, Maximum and Minimum Level Control and Low-Battery Indicator

Artec FZT 1 Classic Fuzz Town

The FZT1 is specially designed to use 2 Fuzz Characters at the same time with the blending function, perfect for getting your own trademark sound. On top of this,the pedal offers a reversed phase output offering that little something extra when you need it.

Atrec APw-7 WhishWah Pedal

APW-7 is a Mid-Low range enhenced traditional Inductor-Transistor type Wah pedal. Most Wah Pedals need the replacement of pots, but APW-3 is fitted with a MAGNETIC FIELD SENSING SYSTEM, so it shows NO POT-NOISE. You can control the Tone range of Wah with the Range-Knob.  It also makes 'Whistleing' sound by adding Resonance using the Whish Knob.

Blue Flame, Custom Made Overdrive Pedal.

It’s a Creamy, Juicy, Harmonic-laden Overdrive Pedal in the original TS-808 school, but with twice the gain and hotter output, and features the classic JRC4558 chip that gave the original TS-808 Tubescreamer its tone

Artec ADL2 Analog Delay

The ADL2 can control the Tone of the Delay from Tab Delay to Long Delay with an analog delay circuitry. This product is made with a robust Metal Case and the reliable Mechanical Metal Foot Switch. The ADL2 will give cool effect sound with perfect DIRECT BYPASS and NON FILTERED OUTPUT functions.

Artec SE-Bod Blues Overdrive

The SE-BOD is fitted with a Filter that makes TWEED CRUNCH TONE.It has been designed to make suitable Drive Sound for BLUES with TUBE EMULATION OVERDRIVE CIRCUIT. Its real specialty is the high resolution sound and Powerful Punch even with small gain.

Artec SE-7DB 70s' Drive Bender

The SE-BOD is fitted with a Filter that makes classic TWEED CRUNCH TONE.It has been designed to make suitable Drive Sound for BLUES and BRITISH ROCK with TUBE EMULATION OVERDRIVE CIRCUIT. Its real specialty is the high resolution sound and Powerful Punch even with small gain. Perfect for Practising quite, and Gigging Loud.

Artec SE-SLD Soloist Distortion

The SE-SLD is specially designed DISTORTION for Solo players.The real key to this pedal is its low noise and high sustaining. You can crank out anything from TWEED DISTORTION SOUND to HEAVY DISTORTION using the contour setting .It gives the perfect tone to any musics.

Artec SE-VCH Vintage Chorus

The SE-VCH offers a Chorus effect perfect for Lead Guitar Work.Its specialty is Vintage tone and long sustain, ladelled with warmth and the feeling of arena sized space.

Artec SE-DDB Duo Drive Bender

The Drive Blender has two Drive Circuits that operate independently of each other. This effect has the mixed outputs of bold tone and meaty distortion. The SE-DDB holds its own from CRUNCH DISTORTION and HEAVY DISTORTION . You can adjust the gains of two Distortions separately.

Artec SE-VPH Vintage Phase Shifter

The SE-VPH makes a perfect Classic PHASE SHIFTER Sound. You can adjust resonance to control SHARPNESS of thePhase Shift.The SE-Vph makes Light work of anything from Funk to Rock. Very versitile.

Artec RSV 3 Resovibe (latest model)

The Optical Control Circuit of RSV3 does not have the Vibe-Noise and it can be controlled easily from the LFO and VCA which are isolated electrically. The Unit can also run at very low levels, making it an ideal practise unit if your looking to perfect something a little different.